The outstanding characteristic of the
H-series models is their low height design. Minimum overhead clearance
is required by this low profile series, allowing free movement of
operating tools in drilling, tapping, milling etc.The holding action in
these types of clamps is same as the VTC-Series clamps. Unlike the
handle & the clamping bar of the VTC-Series, these of the H-Series
clamps move in opposite direction. The clamping arm is available in
three different options as illustrated on this page.
Model No. VTC-3665 UB
Model No. VTC-45105 UB
Model No. VTC-57126 SF
The SF Series have a solid hold down bar which has a fixed guide
bush at its end for the spindle assembly.
The UB Series have a ‘U’ bar arm which enables one or more spindles
to be moved into any desired position along the arm.
