Products > Manual Clamps > Squeeze Action Clamps :

Toggle Pliers - TP  Series

Steel - Smith Toggle Pliers utilizing the toggle principle are made of heat resistant drop-forged steel. Toggle pliers are portable clamps & are not required to be mounted on the fixture. Toggle pliers can have their clamping position pre-set for quick & repetetive clamping. The adjustment is very easy & is done by moving the spindle either forward or backward till the required clamping thickness is achieved, the clamping pressure can be increased or decreased by moving the spindle half a turn as required. A relatively light hand pressure locks the plier with a heavy grip & stays locked until the handles are pulled apart. The range of jaw openings & depths in the toggle pliers allows them to be used in all areas of the manufacturing industry and also over obstacles such as flanges etc.

Model No. TP 2528

Model No. TP 3245

Model No. TP 4570

   

MODELS

A B D0 E L HOLDING CAPACITY WT. IN KGS.
TP - 2528 25 28 13 M 6 X 1 .00 128 100 Kgs 0.220
TP - 3245 32 45 15 M 8 X 1.25 195 200 Kgs 0.570
TP - 4570 45 70 18 M 10 X 1.50 220 400 Kgs 0.640

 

| Home | About Us | ProductsCAD Downloads | Careers | Trade Enquiry | Contact Us |